Bilge Pumps Set
The Bilge Pumps Set for Jetsurf is a combined set of pumps meant to remove water from inside the board — helping to keep internal compartments dry, prevent water flooding, protect engine/electrical components, and maintain board performance and safety. Bilge Pumps Set
There are at least two versions:
-
A000292 — Basic set: includes the electric bilge pump (POP0039) and the base for pumps.
-
A000499 — More complete set for “Race, Race Titanium” boards: includes electric bilge pump (POP0039), vacuum bilge pump Race (POP0122), and a base.
📋 Components & Functions
| Component | Purpose / Role |
|---|---|
| Electric Bilge Pump (POP0039) | Sucks out water that has accumulated; primary pump for regular water removal. |
| Vacuum Bilge Pump Race (POP0122) | A vacuum‑type pump, used in more performance‑oriented models (e.g. Race, Race Titanium) to more effectively evacuate residual water, likely in a lower section or where gravity doesn’t help. |
| Pump Base / Platform | Physical mount / housing area where the pump(s) are fixed; includes suction filter or mesh to prevent debris intake. |
🔄 Compatibility
Which board models / years use which Bilge Pump Sets:
-
A000292 (basic electric + base) is used in 2016 & 2017 models of Race and Race Titanium.
-
A000499 (electric + vacuum + base) is also used in 2016 & 2017 Race and Race Titanium, but not in UltraSport / GP in those years.
So for a 2017 board of “Race” or “Race Titanium” type, A000499 is the full set; A000292 is the more limited set.
🛠 Maintenance & How to Use
-
The bilge pumps must be checked regularly to ensure suction hoses/filters are not blocked (debris, grass, etc.).
-
Clean the suction filter on the electric pump periodically: unscrew the screws on the pump platform, remove the O‑ring(s), and clean the filter. Reassemble carefully so sealing is correct.
-
Make sure electrical connectors are properly connected and water‑tight, especially in marine/splashing environments......
Reviews
There are no reviews yet.